V.le Virgilio, 35 - 46029
Suzzara (MN) - Italy
Tel. +39.0376.531219
Fax +39.0376.521707
Email: info@roversi.com |
| Butter-Churn Kneader MOD. R1EA - LT 100/150/200 |
Look at Great Image (37,7kb) >>> |
TOTAL
CAPACITY |
CREAM
CAPACITY |
LENGTH
mm |
WIDTH
mm |
HEIGHT
mm |
MOTOR
hp |
WEIGHT
kg |
200
150
100 |
70
55
35 |
1100
1050
1000 |
800
800
800 |
925
900
900 |
0,5
0,5
0,5 |
185
180
180 |
|
TECHNICAL-CONSTRUCTIVE CHARACTERISTICS |
- High quality cast iron block.
- Containers made of Aisi 304 stainless steel.
- Internal surface of the containers subjected to a special "sand blasting" treatment which avoids any possibility of the cream sticking to the walls.
- External surface of the containers satin finished with damasked ends.
- Two dismantable kneading rollers made of Aisi 304 stainless steel.
- Discharge tap made of stainless steel for suitable sections.
|
- Protection bar, compliant with UC standards.
- Glass spy hole to control the butter making process.
- Two speed reducer entirely in an oil bath.
- Motor incorporated in the block, and is therefore protected against drips or against any water infiltration.
- The low tension electric command board complies to industrial accident prevention standards.
|
| Butter-Maker Kneader MOD. R2EA, R3A, R3EA & R4A |
<<< Look at Great Image (39,0kb)
 |
| MODEL |
TOTAL
CAPACITY |
CREAM
CAPACITY |
LENGTH
mm |
WIDTH
mm |
HEIGHT
mm |
MOTOR
hp |
WEIGHT
kg |
R2EA
R2EA
R2EA
R3A
R3EA
R3EA
R4A |
400
600
800
1000
1500
2000
3000 |
140
220
300
380
520
750
1200 |
1510
1660
1780
2020
2450
2730
3460 |
900
1000
1050
1150
1300
1400
1400 |
1290
1340
1365
1405
1550
1600
1700 |
2
2
2
4
5,5
7,5
10 |
390
420
460
638
1120
1430
1700 |
|
TECHNICAL-CONSTRUCTIVE CHARACTERISTICS |
- Solid block made of Aisi 304 stainless steel.
- Containers made of Aisi 304 stainless steel.
- Internal surface of the containers subjected to a special "sand blasting" treatment which avoids any possibility of the cream sticking to the walls.
- External surface of the containers satin finished with damasked ends.
- Four dismountable kneading rollers made of Aisi 304 stainless steel (only R3A, R3EA and R4A).
- Discharge tap made of stainless steel for suitable section.
- Hatch made of Aisi 304 stainless steel with rapid closing by n°1 lever.
- Two automatic hatch open stop hooks, with the possibility of discharging the container in rotation.
|
- Container protection bar, made of Aisi 304 stainless steel with an electric safety device compliant with the industrial accident prevention laws.
- Glass spy hole to control the butter making process.
- A two speed reducer dependant on double clutch entirely in an oil bath.
- The face plates of the foot and reducer group are articulated, therefore the rotation of the container is indipendent from any possible unlevel placing surfaces, vibrations and start up jerks.
- Motor incorporated in the block, and is therefore protected against drips or against any water infiltration.
- The low tension electric command board complies to C.E.I. standards.
|
| Former of butter blocks and rolls MOD. F.B. |
Look at Great Image (38,2kb) >>> |
| BUTTER ROLLS |
BUTTER BLOCKS |
|
Ø rolls
mm |
Length rolls
mm |
N° openings |
N° cuts |
N° formats |
Weight
g |
N° formats |
N° cuts |
N° openings |
Block length
mm |
Height
mm |
Width
mm |
28
38
45
58
83 |
90
120
170
200
200 |
3
3
2
1
1 |
4
3
2
2
2 |
12
9
4
2
2 |
50
125
250
500
1000 |
10
8
6
3
2 |
5
4
4
3
2 |
2
2
2
1
1 |
80
100
120
140
180 |
16
24
31
43
60 |
42
52
72
90
152 |
|
TECHNICAL-CONSTRUCTIVE CHARACTERISTICS |
- Tubular frame made of Aisi 304 stainless steel.
- Body-box made in Aisi 304 stainless steel in two halves.
- N°2 - 110 mm. screws made of Aisi 304 stainless steel.
- Hermetic motor-reducer with gears in an oil bath, complete with a 1 Hp motor.
|
- Loading hopper made of Aisi 304 stainless steel.
- Low tension electric control board with an automatic device for running and stopping at each cut.
- N°1 die made of sand blasted Aisi 304 stainless steel (capacity to choice) for blocks and rolls.
|
|
 |